How to Install Shower Standing Handles

Installing a shower standing handles can be extremely beneficial for elderly people who have trouble getting into and out of the shower. According to the Centers for Disease Control and Prevention, 3 million elderly people fall every year, and 37% of those accidents occur in bathrooms. It may be difficult for older folks to get into and out of the shower without a handle to hold onto. In the following table, you will find a variety of ways to mount handles.

Use of Suction Cups

With Shower Standing Handles, people with disabilities or a lack of balance are less likely to fall or slip in the shower because they can get in and out easier. These gadgets are installed using suction cups and have no sharp corners or edges, making them easy to grip and use. Changing the height of the handles is as easy as removing them and reinstalling them.

Mounting Brackets

People who have difficulty walking or standing can reap the rewards of shower standing handles. In lieu of conventional shower handles, these can enhance the stability and security in the bathroom. The likelihood of slips diminish with the use of this fitting. If your safety and balance is a concern for you, it’s recommended to install them in your washroom. Peruse further to find out how to do so yourself! You’re sure to be pleased with the results after they are put up.

Screws

There are a variety of “standing” shower handles to choose from. Suction shower handles can be connected to surfaces with a smooth, nonporous surface. Nonporous tiles are most commonly used. Use a wide tile at the bottom of your wall to prevent it from shifting, and keep the handle away from the grout line. Installing the handles can be done with screws concealed below the wall studs. To avoid a hole in your wall that is difficult to repair, secure them with screws.

Anchors

When installing shower standing handles, the first step is to determine where the grasp bar will be placed. If the bar is to be installed on the tub edge, it should be secured to the tub edge rather than the wall. After drilling a hole in the mark with a cordless drill and masonry bit, screw the anchor into place without overtightening it.

Height

Shower handles come in a wide variety. Although the average person prefers a 36-inch handle, taller individuals may need a 43-inch handle. For extra safety and balance assistance, Life Savers shower handles with grab bars are available. To calculate the handle’s height, the center-to-center distance of the mounting holes is commonly used.

Health Risks

If you have difficulty ambulating, standing handles in the shower can be helpful. They provide additional stability and reduce the risk of falling in the event of an accident. Shower knobs can also be useful for people who have impairments or a loss of balance. The installation of these devices should be done properly so that any potential risks do not occur.

These simple safety tips can help you prevent many pitfalls when setting up your new shower stalls. Ensure there are no slippery surfaces in your bathroom and that the area is free of any debris. Installing grab bars can provide extra stability, allowing you to step in and out of the shower or bath with ease. Using hold bars will also reduce your dependence on unstable ground.